UNISPEED USFL 90/37 EL 6/90 is the new machine for 37° and 90° orbital flaring of hydraulic rigid tubes ends.
The machine, which requires only one tool change to carry out the flaring operations, uses a cold orbital forming process to create a flat and smooth sealing surface at 90° and 37° with a suitable rugosity for the O-Ring seal.
The different possibilities of adjustment and configuration of the USFL 90/37 ES 6/28 allow to obtain any flaring diameter and thickness.
This machines allows to flare tubes from Ø 6 to 90 mm (5 mm thickness), made in stainless steel (AISI 316 TI) and carbon steel (ST 37.4).
The USFL 90/37 EL 6/90 is provided with an electro-mechanical control and an automated tools lubrication system, which acts by means of a dedicated unit.
90° flaring tools for ORFS Parker available upon request.
Flaring tools in compliance with UNI ISO 8434-2 and DIN 3949 standards.
Stainless steel different from AISI 316 TI can compromise the quality of the flaring operation and the tools state of conservation.